Contractor Records
Home › Guides › Roseville, CA contractor license lookup: the CSLB check, the right classification and the permit record

Roseville, CA contractor license lookup: the CSLB check, the right classification and the permit record

Roseville does not license contractors; California does. Every contractor on a Roseville job over $1,000, or on any job that needs a permit, must hold a license from the Contractors State License Board (CSLB), checked free on its Check a License page. The City issued 12,362 permits from October 2024 to September 2026, and the largest group, 3,127, was HVAC.

By Contractor Records · data through October 19, 2026

Which license each job needs in Roseville

Work CSLB classification Roseville permits, Oct 2024–Sep 2026
Furnace, AC or heat pump C-20 Warm-Air Heating, Ventilating and Air-Conditioning 3,127
New homes B General Building 1,690
Plumbing, water heaters C-36 Plumbing 1,410
Remodels and repairs B General Building 1,382
Electrical, panels, EV chargers C-10 Electrical 1,188
Roofing C-39 Roofing 729
Pools and spas C-53 Swimming Pool 470
Solar C-46 Solar (or C-10) 250

The classifications are from CSLB's list, read 26 October 2026. The $1,000 line is from CSLB's AB 2622 release: since 1 January 2025 an unlicensed person may complete "small projects up to $1,000 without obtaining a contractor's license if they do not hire workers and no building permits are needed."

How to run the lookup in five minutes

  1. Get the license number from the bid, or search by business name.
  2. Search it on CSLB's Check a License. Check that the status is active and that the classification fits the job: C-20 for a heat pump, C-36 for a water heater.
  3. Match the name. The business name on the license should be the one on your contract.
  4. Ask for permit numbers from two recent Roseville jobs and look them up, as the Roseville building permit search guide shows; the City's OPS portal tracks inspections by permit number.

Doing the work yourself

California lets you act as an owner-builder. CSLB's guide for building officials says an owner-builder needs no license if they do the work "himself or herself or through his or her own employees, with wages as their sole compensation, and the structure(s) is/are not intended for sale", or if they contract "with properly licensed subcontractors" (CSLB Building Official Information Guide, 2009). The permit is then in your name, so a contractor who asks you to pull the permit for work they will do is putting their job under your name.

What our Roseville pages add

CSLB answers "is this firm licensed". Our Roseville page counts what the City permitted, by kind of work and month: 6,190 permits in October 2025 to September 2026 against 6,172 the year before, with HVAC up 8% and roofing up 29%. The permit statistics page has the months. Roseville's permit rules: HVAC and new home permits. Statewide rules: How to check a contractor's license in California.

What this lookup does not tell you

Roseville's open permit file names no contractor and has no usable status, so we cannot show who did a job, match firms to CSLB licenses or say which permits were finished. A license says the firm may do the work, not how its last job went.

How we know this

License rules are quoted from CSLB's Check a License page, classification list, AB 2622 press release and 2009 Building Official Information Guide, read 26 October 2026. Counts are the City of Roseville's Building Permits Issued open data file, read 19 October 2026: permits issued October 2024 to September 2026.

Numbers come from public permit records in 57 cities, data through October 19, 2026. Nobody paid to be on this page and nobody can.

Questions

  • Does Roseville license contractors?

    No. California licenses contractors statewide through the Contractors State License Board (CSLB). Roseville issues the building permits; check the contractor's license on CSLB's Check a License page.

  • When does a Roseville job need a licensed contractor?

    When it is over $1,000, or when it needs a building permit or the worker hires help. Since 1 January 2025, CSLB says an unlicensed person may do small projects up to $1,000 only "if they do not hire workers and no building permits are needed".

  • Which CSLB license should a Roseville HVAC contractor have?

    C-20, Warm-Air Heating, Ventilating and Air-Conditioning Contractor. Electricians hold C-10, plumbers C-36, roofers C-39, solar installers C-46 and pool builders C-53; a B General Building contractor runs remodels and new homes.

  • Can a Roseville homeowner pull their own permit?

    Yes, as an owner-builder. CSLB's guide for building officials says an owner-builder needs no CSLB license if they do the work themselves or with their own employees and the structure is not intended for sale, or if they contract with properly licensed subcontractors.

  • Can I see which contractor pulled a Roseville permit?

    Not from the City's open data file, which names no contractor, so our Roseville pages count permits and do not list firms. Ask the contractor for permit numbers from past Roseville jobs.

Build your own list

Pick your city and the kind of work. Every firm with a permit on record, sorted by what you value.

Pick what you valuePick your city

Related guides

All guides →

Sources
  1. Check a License — CSLB (2026-10-26)
  2. CSLB Licensing Classifications (2026-10-26)
  3. Handyperson Exemption to Increase to $1,000 in 2025 — CSLB press release (AB 2622) (2026-10-26)
  4. Building Official Information Guide (2009), Owner-Builder exemption (B&P 7044) — CSLB (2026-10-26)
  5. Online Permitting Services (OPS) — City of Roseville (2026-10-26)